EGO – T USER MANUALWe reserve the right to change components and functions of the e-cigarette kit in order to improve the e-cigarette product , without any notice to the consumer.
Experience the Tank system
The ego-T builds on the achievements of the ego. Its huge 650mah battery enables over 800 puffs a day. The ego-T is the first e-cigarette to apply the new tank system for dripping e-liquid directly into its tank atomizer from the 1.1ml tank cartridge. The new tank cartridges works without the use of tissue inside the cartridge. This revolutionary new e-cigarette makes dripping easier and less frustrating for consumers.
The ego-T comes with 2 tank atomizers, 2 650mah batteries, 1 usb charger, 1 wall charger with usb port, 1 pouch, 5 tank cartridges and 1 users manual. The ego-T offers five times as many puffs as other normal e-cigarettes. The ego-T gives a realistic feel and provides lots of vapor with mechanisms inherited from the ego double air circulation system. The new power saving battery function improves the efficiency of power consumption.
The ego-T uses a 3.7 volt, 650 mah rechargeable battery with a power saving safety function which allows you to turn the battery on and off. This prevents accidental discharge of battery when not in use. To avoid damage to your ego-T, under normal conditions, it takes about 8 hours to fully charge your battery. The ego-T battery has a microchip to prevent overcharging. The charger will automatically stop when the battery is fully charged.
To charge your battery, gently screw the battery into the usb charger, plug the usb cable into a usb charger or a computer usb port. The battery should flash to show it is charging. The light on the usb charger is red when charging and green when fully charged.
When using a computer to recharge
You should use only the dedicated usb charger provided in the kit to avoid damaging your battery.
Use a high voltage usb port to charge your battery properly.
Charge the battery fully before using to help maintain a good battery life.
How to assemble your ego-T
To assemble the eGo-T, you need the battery, tank atomizer and tank cartridge. First, screw the atomizer onto the battery. Then take your filled tank cartridge and gently push it into your tank atomizer. Do not force it in, as this can cause damage.
Using the ego-T
The ego-T works only when you press the LED button. Press the LED button and inhale at the same time. Release the button after inhaling. When you press the button, the LED light will turn on. Pressing the button too long may cause overheating and damage the ego-T.
The battery is shipped in the off position. In the off position, the ego-T will not function, even when pressing the button. To turn on the battery, press the button 5 times within 2 seconds. You will see the LED button flash. To turn off the battery, press the button 5 times within 2 seconds.
Refilling with e Liquid:
Maintaining the ego-T is simple and easy. Use as directed and clean regularly. Be careful not to let dust into the atomizer or battery component.